Ergo-Glass

Standard equipped with two round suction cups, more suction cups and Ø can be added or changed for customization.

Equipped with pneumatic controlled continuous rotation, in both directions, including pneumatic adjustable center of gravity.

The control handle provides a logic and simple interface for the operator for up and down movement as well as pushbuttons for grip and release of the glass panels.

The control box at the top provides settings to adjust speed depending on the application.

Glass panels: 65/96/116/162kg depending on the configuration of the suction cups.

58 kg / 128 lbs
Max depending on lifting capacity.

Clean dry air, pressure 6-8 bar

2 suction cups with a safety factor of 4.

Both audio (buzzer) and visual (red lamp) indication when insufficient vacuum or air pressure.

Up movement is automatically restricted when too low vacuum is detected.

Load is continuously supervised by the Quick-Lift and can only be released once the end effector is landed on the surface.

Glass panels : 90/180/250kg depending on configuration of the suction cup/cups.

Max 15 kg depending on lifting capacity.

Equipped with fixed one (oval) or two (round) suction cups.

The control handle provides a logic and simple interface for the operator for up and down movement as well push buttons for grip and release of the glass panels.

The control box at the top provides setting of adjustable speed depending of the application.

Clean dry air, pressure 6-8 bar.

1 or 2 suction cups depending on configuration with a safety factor of 4.

Both audio (buzzer) and visual (red lamp) indication when insufficient vacuum.

Up movement is automatically restricted when too low vacuum is detected.

Load is continuously supervised by the Quick-Lift and can only be released once end effector is landed on surface.

From 10 kg - 80 kg

Vacuum ejector with air saving control and blow function for easier release.
Programmed vacuum level : -0,8b.
Activation of audible and visual alarm when vacuum level falls below : -0,6b.
Activation of the ‘stop up’ function (load cannot be lifted and must be lowered) when the vacuum level is below : -0,6b.

- Compact ejector with fully integrated functionality.
- Suction rate (max) of 195l/min.
- Air consumption (during evacuation) 290l/min.
- Noise level (free) 78 db at operation pressure between 4,0 – 7,0 Bar.
- Vacuum (max) at 850 mBar. Control-normally open (NO).
- Equipped with digital air safe functionality.

Note: Vacuum generators are only used on EGFP-v and EGFP-vc.

- External handle in different sizes
- Optional color end effector (Standard color = white RAL 9016)

Ergo-Glass end effectors deliver ergonomic handling solutions for windows, doors, aerospace, metal, composites, and furniture/woodworking.

Glass panels : 65/115/150 kg depending on configuration of the suction cups.

Max 34 kg depending on lifting capacities.

Equipped with fixed one or two (round) suction cups.

The control handle provides a logic and simple interface for the operator for up and down movement as well push buttons for grip and release of the glass panels.

The control box at the top provides setting of adjustable speed depending of the application.

The control box at the top provides setting of adjustable speed depending of the application.

Pneumatic rotation and tilt glass panels.

Main direction of suction cups is to be defined.

1 Rotative head mounted on free bearing End effector with driven rotation. Vertical portrait towards flat laying.

Clean dry air, pressure 6-8 bar.

1 or 2 suction cups with a safety factor of 4.

Both audio (buzzer) and visual (red lamp) indication when insufficient vacuum.

Up movement is automatically restricted when too low vacuum is detected.

Load is continuously supervised by the Quick-Lift and can only be released once end effector is landed on surface.

Vacuum tank (in case of insufficient vacuum).

Up to 420 kg depending on the suction cup configuration

The weight of the end effector ranges between 30–100 kg, depending on its size and lifting capacity.

The control handle provides the operator with a logical and simple interface for up and down movement, as well as push buttons to grip and release glass panes.

The control box at the top allows adjustment of variable speed depending on the application.

Pneumatic tilting of glass panes.

The main orientation of the suction cups must be defined. The tilting angle is 0–90°.

Clean, dry air, pressure 6–8 bar.

Suction cups with a safety factor of 4.

Both audio and visual signals (red lamp) in case of insufficient vacuum.

Upward movement is automatically restricted when low vacuum is detected.

The load is continuously monitored by Quick-Lift and can only be released when the end effector is resting on a surface.

- Humidity filter
- Vacuum tank (in case of insufficient vacuum).
- Adjustable suction cups
- Sensitive handle in different sizes
- Second push button for grip and release
- Optional color end effector (Standard color = white RAL 9016)

Glass panels : 50-215 kg depending on configuration of the suction cups.

End effector weight somewhere between 30-100 kg, depending on end effector’s size and lifting capacity.

Equipped with one or more fixed suction cups.

The control handle provides a logic and simple interface for the operator for up and down movement as well push buttons for grip and release of the glass panels.

The control box at the top provides setting of adjustable speed depending of the application.

Pneumatic tilt of glass panels.

Main direction of suction cups is to be defined. Degree of tilt is 0-90°.

Clean dry air, pressure 6-8 bar.

Suction cups with a safety factor of 4.

Both audio (buzzer) and visual (red lamp) indication when insufficient vacuum.

Up movement is automatically restricted when too low vacuum is detected.

Load is continuously supervised by the Quick-Lift and can only be released once end effector is landed on surface.

Vacuum tank (in case of insufficient vacuum).

Profiles : 30/60 kg depending on configuration of the suction cups.

End effector weight somewhere between 30-80 kg, depending on end effector’s size and lifting capacity.

Equipped with fixed suction cups.

The control handle provides a logic and simple interface for the operator for up and down movement as well push buttons for grip and release of the glass panels.

The control box at the top provides setting of adjustable speed depending of the application.

Both grip or suction function to maximize lifting options of profiles.

Clean dry air, pressure 6-8 bar.

All suction cups with a safety factor of 4.

Both audio (buzzer) and visual (red lamp) indication when insufficient vacuum.

Up movement is automatically restricted when too low vacuum is detected.

Load is continuously supervised by the Quick-Lift and can only be released once end effector is landed on surface.

Maneuvering is done with Binar Handling's patented control handle. Only a small force is needed to engage the up/down motion. When the operator let go of the handle, the up/down motion is immediately stopped.

End effectors are designed to fit customers need. Intelligent I/O signals are available for optimum functionality.

Vacuum tank (in case of insufficient vacuum).

Glass panels : 80/150/240 kg depending on configuration of the suction cups.

55 kg Max, with manual rotation.
61 kg Max, with pneumatic rotation option.

Equipped with two fixed round suction cups.

The control handle provides a logic and simple interface for the operator for up and down movement as well push buttons for grip and release of the glass panels.

The control box at the top provides setting of adjustable speed depending of the application.

Manual rotation of glass panels.

Pneumatic controlled center of gravity (COG).

Main direction of suction cups is to be defined. Degree of rotation is 0-180°.

Clean dry air, pressure 6-8 bar.

2 suction cups with a safety factor of 4.

Both audio (buzzer) and visual (red lamp) indication when insufficient vacuum.

Up movement is automatically restricted when too low vacuum is detected.

Load is continuously supervised by the Quick-Lift and can only be released once end effector is landed on surface.

Additional pneumatic cylinder built in for inclination (approx 10°).

Vacuum tank (in case of insufficient vacuum).

Pneumatically controlled rotation of glass panels.
Degree of rotation 0-90°.

Ergo-Glass end effectors provide ergonomic handling solutions for windows, doors, aeronautics, metal industries, composites, and furniture/woodworking.